What is Black Specks or Streaks Black or brown specks are spots of degraded plastic or dark spots that show on the injection molded part. This Black or brown specks defects will be more visible on white color or clear plastic molded parts, we also call as carbon buildup, sometime we normally think it is […]
MUD U Frame is A cost-effective approach to injection molding This MUD (Master Unit Die) Quick-Change systems was designed to reach the parallel challenges of increasing productivity and decreasing production costs. MUD Quick-Change U frame Systems are more frequently becoming a part of the operational strategies for many companies who employ lean mold manufacturing programs […]
Why need design ribs on the injection molded parts Injection molding technology is the most common manufacturing technology for producing high volume of plastics parts in the world. The purpose of these parts can range from a picture frame that is never touched to a gear that is used in a moving assembly every day. […]
Are you looking for different mold texturing surface finishs on a plastic part cavity side? Plastic parts not only benefit from designs that are pleasing to the eye, but they also benefit from the way a product feels when handled. Depending on the application, you may want your plastic mold part to be as smooth […]
Soft Mold Low Volume Plastic injection molding In line with the history of the branch, since 1999, completely different companies have been providing innovative soft mold low volume quantity injection moulding solutions to numerous high profile organizations throughout a variety of industries throughout all of the continents. Undoubtedly the addition of low volume injection moulding […]
How to avoid the Air Traps Defects As plastic fills the mold cavity, it compresses the air that is in the cavity. The pressure of the air pocket increases until the required pressure is achieved to push air out of the mold vents. If the areas where the air is trapped do not have a […]
How to save injection molding cost by Part thickness design reduction By do the DFM (Design For Manufacturing) report and mold flow analysis to keep part thickness down to the minimum but having the same strength, we have reduced cooling times by as much as 31 seconds! As you can see by the table below […]
Plastic Part Design Analysis Theory The plastic part molding process is heavily affected by factors of the plastic part design. If the critical parameters of a part design are not set correctly, the part will have quality issues during the molding process. The most critical of these parameters is as follows: Plastic Part wall thickness […]
How to prevent Sink Marks defects in advance Sink marks defects are localized depressions in the surface of injection molded parts caused by a non uniform shrinking of the plastic during the cooling process. In cosmetically critical parts, they can be a serious problem. Sink marks are dependent on part geometry and material shrink rates. […]
Mold Fill time is another name for melt front advancement. Our fill time animations provide the visualization of the part cavity filling before your very eyes! As you can see from the animation, phenomena such as race tracking, weld lines formation and air trap formation are easy to visualize. Race tracking is when the plastic […]
Dutch 
English 
Italian 
French 
Spanish 
German 
Russian 
Polish 
Turkish 
Arabic