Hva er sprøytestøpingsproduksjon?

What is injection molding manufacturing? It is notably used to mass-produce plastic items, even with complex designs. The manufacturers melt the material and then pour it into the mold to create countless products as we use them daily.

Learn the science behind the injection molding process, the art of mold making, and, of course, the finishing techniques in this article. 

Types of Injection Molding Machines

Injection molding manufacturing can be done by several machines. The engineers design these while focusing on the diverse demands of industries like automotive parts, electronics, and consumer goods.

Machine selections are the factors affecting injection molding quality. That may affect the precision, efficiency, and economic concerns. Let’s explore what basic types of injection molding machines can be used and their unique characteristics.

Hydraulic Machines:

Hydraulic injection molding machines have been on the market for decades. These setups use hydraulic power to control the clamping unit, injection unit, and other components. The advantages of this machine can be the following:

• It manages high clamp pressure and effectively creates complex and large parts.
• This machine is the best option to produce large-volume plastic products.

But somewhat, they are less energy efficient. If you use them excessively so they need higher maintenance compared to modern alternatives. Despite this, it remains an affordable choice for certain applications.

Plunger Machines:

Plunger-type injection molding machines contain a mold cavity, a core section with a plunger, and a hopper. When you charge the raw material inside the hopper (attached to the barrel) by setting the temperature from the controller.

This plunger moves downward and injects the material. That melts inside the barrel into the mold. This is done with some high pressure. These machines are needed to produce those basic applications where extreme precision is not necessary.

Fordeler:

• It’s used in small-scale industries for
• some small and simple products.
• This is an affordable choice.
• You can easily maintain them.

Ulemper:

• It’s quite limited in providing control over material flow.
• Plunger-type injection molding often fails to distribute material in the mold cavity evenly.
• Releasing sprays are required as they are not suitable for complex shapes.

Two Unit-Plunger Machines

In Plunger-Plunger Machines, you will find that it utilizes a two-stage process for better control of plastic material. The first plunger compresses the charged material. It enables uniform density and reduces air pockets. The other plunger then fills the molten material in the mold and leaves it for solidification with greater precision.

Fordeler:

• This machine is known for its improved control systems compared to single plunger types.
• It brings better quality for particular complex shapes and customized molds.
• Provide more consistency.

Bruksområder:

It’s a very common machine and we often use these types for automotive parts and consumer goods requiring intricate detailing.

Screw Machines:

Screw machines and plunger-plunger types are quite common. In a screw-type machine, there are two chambers: one chamber is used to plasticize the raw material, and another chamber is used for injecting the material inside the mold. The material is charged from the hopper to the barrel. In the barrel section, it consists of some band heaters along with the screw that rotates. They both help in plasticizing the raw material.

Fordeler:

• The plunger and screw machines are quite similar, but the result and efficiency of the screw plunger type machine are more efficient.
• It provides you with excellent control over material flow and higher injection pressures.
• These machines can handle thermoplastic materials like ABS, nylon, and polycarbonate.
• It can be used for producing large quantities of products with detailed designs.

Ulemper:

• Costly than plunger machines.
• It is technically different from a simple machine and requires skilled operators and regular maintenance.

Reciprocating Screw Machines:

The most seeing machine is a reciprocating-type injection molding machine. The black substances on this machine are called heating elements. They are attached to the barrel. Inside the barrel, there is a reciprocating screw.

The reciprocating screw is organized into three zones, which are the feed zone, transition zone, and metering zone.

In the feed zone, the material is transferred from the hopper to the barrel. The transition zone compresses the material, and in the metering zone in front of the screw, there is an NRV, which prevents backflow of material. That it does not return inside the barrel at the time of injection.

This dual action mechanism is good for gaining precision in the measurement of the short-size objects and optimal injection pressures.

Fordeler:

• This machine allows you to control injection pressure in a better way.
• Help in producing small-sized objects.
• Ideal for detailed parts and complex shapes.
• It improves material mixing and minimizes material waste.

Ulemper:

• When you create more intricate designs, it requires higher maintenance.
• The initial investment cost of these types of machines can be significant.

Bruksområder:

This is the most common and efficient machine used in almost all plastic industries

of injection molding for making parts of electronics and medical devices.

Injection Molding Manufacturing In-depth Process

Rheology of Plastics

In the injection molding process, you’ll find the flow of molten plastic. Viscosity is an incredible parameter to determine how easily material flows under pressure. It can be influenced by factors of just some of the melt temperature, injection pressure, and flow rate. 

You’ll see how higher temperatures reduce viscosity and make a big difference in smoothing the flow into the mold cavity. Whenever you lower the temperatures, it will cause incomplete filling and defects in processing.

Some of the thermoplastic materials, like polypropylene (PP), ABS, and nylon 6/6, show different viscosities. That is usually based on their molecular structure and resin type. Which also impacts their suitability over applications.

There are two main types:

1: Newtonian

2: Non-Newtonian.

Newtonian fluids flow consistently, like water. Non-Newtonian fluids change flow rate under stress, like ketchup.

Shear thinning occurs when fluids flow faster under increased stress. This affects melt flow in plastics. Molecular weight distribution (MWD) also impacts melt flow. A broader MWD can lead to more complex flow behavior.

The relationship between shear rate and viscosity can be described by the Power Law equation:

η = K * (γ)^n-1

Where η is viscosity, K is consistency index, γ is shear rate, and n is power-law index.

Heat Transfer and Cooling

Heat transfer during cooling time is important in plastic injection molding manufacturing. Many cooling channels facilitate heat dissipation, preventing part distortion and ensuring consistent solidification.

To establish appropriate sizing and quality accuracy of the final part you must apply even cooling. That removes the internal stresses and warping.

After adjusting cooling parameters in mold design, you will get improved cycle times. It also supports energy efficiency, aligning with sustainable injection molding practices.

The heat transfer rate (Q) can be calculated using:

Q = h * A * ΔT

Where:

• h: Heat transfer coefficient
• A: Surface area
• ΔT: Temperature difference

The cooling time (t) can be estimated using:

t = ρ * c_p * V / (h * A)

Where:

• ρ: Density
• c_p: Specific heat capacity
• V: Volume

Stress and Strain Analysis

Some of the rapid changes in pressure and temperature will cause stress and strain as molten plastic is injected into the mold cavity.

Basic ideas and best molding practices like controlled injection pressure, holding time, and cooling time result in the most successful operations. This simply eliminates the mechanical properties, part strength, and potential for defects like sink marks or weld lines.

Material Science Fundamentals

The molecular structure of thermoplastic materials refers to specific elements. That determines their melting point traits and final attributes. Taking examples of polycarbonate (PC) and nylon 6 shows how they exhibit high strength and flexibility for complex shapes and detailed parts. 

Additionally, the choice of virgin material or recycled plastic affects parameters like viscosity, flow characteristics, and overall cost-effectiveness. These are constant fundamentals on which injection molding manufacturers must focus.

Mold Making With Injection Molding

Mold Design Principles

The actual foundation of successful mold injection manufacturing depends on mold design. You can ensure the factors, such as efficiency and quality in part production, via several principles.

Draft angles:

Every time that setting up suitable draft angles makes the ejection process smoother. It reduces wear on the mold and minimizes surface defects. They do not impact complex shapes and intricate designs.

Utforming av kjølekanal:

When determining uniform cooling, consider efficient cooling channel design. It prevents part distortion. Proper placement and measurement taken for channels reduce cooling time and improve production efficiency.

Gate and Runner Design:

The location of gates and the configuration of cold runners impact the settings for mold filling. You need to focus on the well-designed gates. That basically caters to even filling and minimizing defects like weld lines.

Ejection Systems:

Ejection systems should be chosen after careful study of part geometry and application. These systems often utilize ejector pins, sleeves, or plates. This system helps in removing parts from mold safely.

Advanced Molding Techniques

Modern mold injection manufacturing allows operators to create versatile designs with accuracy.

The process stack molds provide high efficiency across high-volume production. Overmolding is the go-to choice for making ergonomic grips or multi-functional components combining multiple materials or colors.

The other process, called insert molding, integrates metal or other components into the mold. It can produce results with increased functionality. Examples can be threaded inserts in automotive parts.

Computer-Aided Design (CAD) and Manufacturing (CAM)

Although many of the advanced molding techniques like CAD and CAM provide the actual benefits in the overall production process.

• It allows precise mold design creation compared to much older molding
• techniques.
• They represent the simulation of those material flow, cooling, and stress distribution.
• In many cases, it supports complex mold cavities and mold core geometries.
• These techniques lead the manufacturing process into the actual material saving and reducing cycle time.
• Also caters to sustainable injection molding practices.

Finishing Techniques for Injection Molded Parts

Trimming and Deflashing

As along the edges of the molded part, excess plastic (commonly referred to as “flash”) can form. It occurs because of overflow or misalignments during the injection process. Being post-processing steps, trimming and deflashing remove excess material and compensate for any inefficiencies in parts’ edges. You can also integrate automated systems or manual tools. That helps you achieve precision in high-volume production.

Painting and Coating

When we convert raw material into something special part it further requires a finishing process. That not only increases its features but also its aesthetic appeal. For this, painting and coating steps are crucial. For instance, applying protective coatings offers resistance to wear, UV exposure, and corrosion.

Assembly and Integration:

Many of the finished parts via injection molding need to be assembled to create the actual application. Assembly and integration steps let you combine the multiple parts of the product. For this, you can either use mechanical fasteners, adhesives, or even welding techniques. For example, the parts of automobiles, consumer goods, and electronic devices.

Other finishing techniques

• Polering: It is the parameter that enters into the process to increase surface smoothness and gloss.
• Plating: These are coatings that can be applied to add a metallic finish, from which it forms a protective layer on the molded part. That improves its durability and visual appeal.
• Texturing: Imprint patterns concern themselves with the surface. They offer tactile or visual enhancements in automotive parts and consumer goods, etc.

Konklusjon

Injection molding history proved its evolution. It changes the aspect of simple design. Knowing what is injection molding manufacturing is concerned with a remarkable blend of science, engineering, and technology.

Advancing injection molding equipment lets manufacturers embrace sustainable practices. So choose best injection molding manufacturing service in China like Plastic Mold.