Are you looking for an entreprise de moulage par injection in one of the world’s superpowers? The USA has long been the power hub and home to all technological advancements. In the last century, the USA has seen tremendous growth in industrialization, and entreprises de moulage par injection de plastique are no exception.
Nonetheless, any work’s success depends on how we choose to do it. In the same way, the best quality product is likely to come from the best molding company. The number of injection molding companies in USA is not small, so finding the best USA injection molding companies can be quite troublesome.
But relax! We will take you on a tour of the plastic injection molding companies in the USA. Let’s check out the top 10 injection molding companies in the USA-
Rank #1 Scientific Molding Corp Ltd.
Since 1988, SMC Ltd. has been on a mission to provide high-quality plastic injection molding manufacturing services. This core value has grown SMC into a globally recognized contract manufacturer. From its early days, SMC’s core competency was injection molding services. They provide tooling and molding single-use and single-patient finished devices. SMC serves today across the medical, diagnostics, and pharmaceutical markets.
The company’s global locations are California, Wisconsin, Ohio, Massachusetts, and India, which allows it to provide complete custom device services. These services range from initial designing to component manufacturing and focus on healthcare markets. The full contract manufacturing of their devices is available at an SMC manufacturing location.
Principaux services
- Single-use and disposable medical devices
- Contoured silicone masks for hospital or home use
- Advanced injection molding services for medical devices
- Custom manufacturing solutions for the healthcare industry
Pour
- SMC has long been a trusted source of medical instruments. You can rely on them without any doubt.
- Their strategic locations have strengthened their supply chain so you can get your products from almost any corner of the world.
- Besides conventional devices, they offer the luxury of customization. As a result, they can supply products based on your requirements.
Cons
- SMC’s plastic injection molding services are a bit costly. In comparison to the market, the pricing may seem higher.
- Their expertise in other plastic injection molding is limited to the medical sector. You cannot seek an all-out solution for other industrial products from them.
- Their online response is not satisfactory. You need to visit one of their manufacturing sites in person for contracting.
Si vous cherchez plastic injection molding compannies in the USA that offers medical injection molding services, you may contact with them for quote.
Rank #2 Xcentric Mold & Engineering
Xcentric is a nimble company with experts in injection molding services. It takes an engineer-centric approach to everything it does. Tens of thousands of product developers and engineers across North America trust Xcentric. They serve companies from start-ups across aerospace, electronics, and more industries.
The plastic molding company has expanded into two customized plastic injection molding facilities. A team of seasoned industry veterans leads the company. They provide customers with consistent results under ever-shorter timelines, allowing you to get your product to market faster than ever.
Principaux services
- Prototype injection molding
- Prototypage rapide
- Injection mold making
- Usinage CNC
- Impression 3D
Pour
- Xcentric is transparent with its processes. You can inspect their manufacturing processes from your home.
- They are sharp in all the steps. Their delivery time is very fast.
- The molding company is very flexible. They will accept even a last-minute order from you and still deliver on time.
Cons
- Xcentric may bait and switch on pricing and materials. Know what you are working with; otherwise, they will take advantage of you.
- Their after-sales service is questionable. They take no responsibility and ignore you when you contact them for defective products.
- Every aspect of their business tends to short-term sales rather than long-term relationships.
Si vous cherchez plastic injection molding compannies in the USA qui offre moulage par injection de prototypes services, CNC machining, and 3D printing services, you may contact with them for quote.
Rank #3 EnviroTech Custom Injection Molders
Envirotech is a world leader among plastic injection molding companies. They have more than 50 years of experience providing efficient molds. They also help with product design for moldability and provide polymer engineering support. They are the producers of the largest injected polymer products on the market. They have the capacity for single shots up to 530 lbs., with presses ranging up to 2500 tons.
EnviroTech is part of the Klinkau group of companies offering solutions to customers. From chemical processing to metal replacement technology, they have all the solutions. They continue to press the limits in molding and developing processes. They offer a range of solutions other molding companies cannot even consider. You can get low-cost foreign molds to complex and capable molds for Air Force fighter jets.
Principaux services
- Engineering consulting
- Moulage par injection sur mesure
- Mold optimization and troubleshooting
- Slab stock molding
- Near net shape molding and machining
Pour
- EnviroTech offers diversified products and services in defense, medical, food processing, mining, etc.
- They are very easy to communicate. The company website is well-designed and guides any customer.
- They have a unique capacity to create solutions that substitute expensive, fabricated steel products. This reduces costs, saves time, and increases the durability of your component life.
Cons
- The production cost is a bit high at EnviroTech. Review your budget before choosing them.
- Their delivery time is longer than others. So, keep enough time to expect their delivery.
Si vous cherchez plastic injection molding compannies in the USA that offers Engineering consulting, slab stock molding services, you may contact with them for quote.
Rank #4 Xometry Injection Molding
Xometry is a company where big ideas grow to solve critical problems. It provides manufacturers with certain opportunities to grow their business, makes it easy for buyers to access global manufacturing capacity, and helps create resilient local supply chains.
For years, pricing for plastic injection molding services was opaque. Xometry created a global marketplace for the sourcing of on-demand parts. It generated an instant and accurate price for buyers and sellers. Artificial Intelligence gave them the tools to create a machine-learning approach. Xometry prices part designs and lead times and matches them to the appropriate sellers.
Principaux services
- Moulage d'insertion
- Surmoulage
- Bridge tooling
- Quick turn molding
- Post-traitement
Pour
- Xometry has the privilege of massive network capacity. Its production capacity includes over 10,000 manufacturers in 46 US states, Europe, and Asia.
- Xometry offers instant quoting. They provide pricing, lead times, and feedback in a matter of clicks, not days.
- Their commitment to environmental impact is praiseworthy. They have a project named ‘Xometry Go Green Initiative.’
Cons
- Xometry is not a traditional plastic molding company. They are more of a common marketplace between buyers and sellers. You need to be careful to deal with them.
- Their pricing mechanism is machine-based. It gives less scope for bargaining.
Si vous cherchez plastic injection molding compannies in the USA qui offre surmoulage, insert molding, and quick turn molding services, you may contact with them for quote.
Rank #5 Plastech Molding Solutions
Plastech Molding Solutions, a former R.E.C. Manufacturing Corporation, was founded in 1943. Thus, it has more than 70 years of experience with custom injection molding. What sets Plastech Molding Solutions apart is its longevity in the molding industry. It is knowledgeable in compression molding and thin-wall complex geometry applications.
Their modern 40,000 sq ft. facility has a well-equipped metrology lab. They also have 29 injection molding machines ranging from 22 to 310 tons. A host of secondary equipment, such as sonic welders, can add value to almost any product. They are ISO 9001 certified and ITAR registered through the US State Department.
Principaux services
- Engineering resin molding
- Class 10,000 cleanroom molding
- Marquage à chaud
- Sonic welding
- Scientific molding
Pour
- Plastech has very good management in all disciplines. Their benign gestures will make you feel safe and optimistic.
- If you need sophisticated devices, they are the best option. They can deliver products of any kind, which you might not even think of.
Cons
- Sometimes, their product quality varies from their promised quality mark. So, check your products with caution.
- They may charge you for transportation even if you don’t need it, and there are other hidden charges.
Si vous cherchez plastic injection molding compannies in the USA that offers cleanroom injection molding, sonic welding molding, and hot stamping services, you may contact with them for quote.
Rank #6 Nypro Mold
Nypro Mold is a top-ranked company in the world of high-precision injection molds. It serves many of the world’s largest and most influential brand owners and has a strong presence in healthcare, packaging, consumer, and electronics markets. Its team has expert engineers complemented by the world’s leading software packages.
Nypro Mold understands that customers demand more than manufacturing excellence in mold making. So, they prepare the most innovative data-driven solutions and provide their customers with industry-leading cycle times. It designs and manufactures approximately 200 molds annually. Each mold is unique in its requirements and the range of services employed.
Principaux services
- Optimisation des pièces en plastique
- Développement de l'ingénierie des moules
- Qualification des moules et validation des pièces plastiques
- Mold life asset management
Pour
- They have a dedicated client portal. You can reach out to them anytime from any corner of the world.
- They maintain a portfolio where you can compare your requirements. It is easy to select a component if you have previous layouts before you.
Cons
- They focus on healthcare, packaging, and personal care only. Complex industrial solutions are not available to them.
- Their billing system is not always automated. Sometimes, that can take you a long time.
Si vous cherchez plastic injection molding compannies in the USA qui offre moule d'injection plastique manufacturing ,die casting mold making services, you may contact with them for quote.
Rank #7 EMI Injection Molding
EMI is an expert in the processing of thermoplastic and composite materials. They are exceptional in the development of customized assemblies and sub-assemblies. Since 1995, the Alsace-based company has been investing in ambitious projects. They work in partnerships with many companies from different industries. This diversity leads to an ever more innovative response to demanding industrial needs.
Strong knowledge in its field of activity and an instinct for challenge enable EMI to think outside the box. EMI always aims for excellence. As a long-term partner, they keep on offering ever more innovative solutions. They carry out tests on the resistance and watertightness of plastic parts. They believe in and enforce professional equality. They often work in research and development to improve their quality.
Principaux services
- Injection molding of medical devices injection
- Hybrid injection molding
- Bi and tri-material injection molding
- Mass production with cube molds
Pour
- EMI often produces up-to-date products. If you want the latest products, EMI can be your best choice.
- They know how to respect the customers. You will feel comfortable to deal with them.
Cons
- They are not yet prepared for large-scale manufacturing. You should not be optimistic about bulk production at EMI.
- Their business policies sometimes contradict regional rules and laws. It’s better to verify their updated business policies.
Si vous cherchez plastic injection molding compannies in the USA that offers Hybrid injection molding and medical injection molding services, you may contact with them for quote.
Rank #8 Creative Plastic Injection Molding, Inc
Founded in 2001, Creative Plastics is a family-owned and operated manufacturing business in Clackamas, Oregon, outside Portland. The owners developed partnerships with the best toolmakers in the Pacific Northwest, which allowed them to meet their customer needs and offer competitive pricing. They use all the expertise they’ve gained over the years in part production.
They have installed a closed-loop water-cooling system. Its chemical treatment prevents any rust or deterioration of the customers’ tools. They have three sonic welding machines. These support secondary operations, such as welding parts together or brass inserts. Their facility has plenty of space to consult with their engineers on the project.
Principaux services
- Heat staking
- Custom Packaging
- Laser etching
- Chromage
- Hydrographic Decoration
Pour
- Creative Plastics pays attention to the smallest details. Their commitment to customer satisfaction is commendable.
- They do not bother customers with unnecessary formalities and will not ask you to submit hundreds of documents to do business.
Cons
- Sometimes, they blunder the products while implementing your ideas, but they tend to refuse to shoulder the responsibilities.
- Their backup system is vulnerable. So, if there is any trouble in the existing manufacturing system, you might get stuck for a long time.
Si vous cherchez plastic injection molding compannies in the USA that offers laser etching and chrome plating for injection molding products, you may contact with them for quote.
Rank #9 Fathom Injection Molding
Fathom is a highly precise, responsive, and comprehensive manufacturing partner. Whether for a single component or your entire product lifecycle, Fathom is always there. Fathom will work with you to identify the best technology and processes and provide immersive engineering support.
Fathom provides advanced rapid prototyping and on-demand low-volume production services. Its manufacturing sites cover almost the whole USA, yet it offers different products at each site. You can choose its products without any hassle. From domestic injection molding to complex industrial molding, it solves every problem.
Principaux services
- Urethane casting
- Sheet metal prototyping
- Photochemical etching
- DMLS printing
- Additive post-processing
Pour
- Fathom is very specific about its services. It offers and prices exactly what you ask for, nothing extra.
- Their customer dealing is smooth and lenient. They update you about different stages of production so that you remain tension-free.
Cons
- According to various customer reviews, they outsource products that might lack quality standards. You need to cross-check the products after delivery.
- The company may not be suitable for producing consumer products like household items. It is ideal for making large parts for cars and small parts for electric devices.
- The platform for contacting the company is nice, but the response time is very slow. You may have to wait 2-3 days for a response, and sometimes, you won’t get any response.
Si vous cherchez plastic injection molding compannies in the USA that offers sheet metal prototyping and additive post-processing services, you may contact with them for quote.
Rank #10 PTI Injection Molding
PTI Engineered Plastics is a leading American plastic molding company and manufacturer of plastic components and assemblies. It serves the medical, defense/aerospace, and commercial/consumer products industries. PTI offers low—to mid-volume plastic injection molding for simple to complex projects.
They have a 160,000 sq ft. advanced manufacturing facility, so they offer assembly and packaging services. PTI has an array of value-added services. They abide by the IQ/OQ/PQ validation protocol and production part approval process (PPAP). They define the project’s scope and execute a plan to achieve that expectation. For over 35 years, PTI has been serving manufactured plastic components.
Principaux services
- Cleanroom molding, including high-precision injection molding, testing and development
- Ultrasonic welding, spot welding, ultrasonic cutting, and design considerations
- EMI shielding, conductive coatings, thermoplastic enclosures
- Pad printing, multi-color printing, surface pre-treatment
- Laser marking, including fiber and CO2 laser marking
Pour
- PTI’s availability is very open, and its strategy skills are at the next level. Their professionalism is the cherry on top. Their social media coverage lets you communicate through any medium.
- They have a pretty decent working environment. If you need someone who maintains the labor laws, they are the ones.
Cons
- They have some duplicate pages, which might confuse you. It’s better to verify the original webpage and then use their services.
- The protocols they maintain may seem annoying to you. It also costs you precious time.
Si vous cherchez plastic injection molding compannies in the USA that offers Ultrasonic welding injection molding, cleansoom moulage par injection, and other surface finish services, you may contact with them for quote.
Résumé
So, how was the tour of the top 10 injection molding companies in the USA?
As the biggest economy in the world, the USA has plenty of options in every sector. Plastic injection molding companies play a big role in providing quality industrial products. There are some variations among the different companies, though. Your requirements must coincide with those of the plastic molding company.
Before choosing a molding company, we recommend cross-checking its details. You need to consider both your demands and the company’s capabilities. After all, you will make critical decisions that can drive your business forward or collapse.
We only tried easing the decision-making process by simplifying the individual backgrounds. We wish you all the best for your continuous success. Feel free to contact us anytime with any further queries.