PEEK Plastic Injection Molding: Applications, Advantages, and Your Trusted Partner Without any doubt, PEEK (polyether ether ketones) is the best plastic on the market right now. PEEK platic injection molding is unique because it is powerful and able to stand up to high temperatures and harsh chemicals. Another thing is that PEEK injection molding part […]
What is injection molding surface finish Injection modlign surface finish is the post surface finish process added to the plastic injection molded parts, those include painting, silk-screen, chrome plating, pad printing, thermal transfer printing,water transfer printing, laser engraving, and so on, all of those addtional process we call surface finish process. When you start a custom […]
Medical Injection Molding: A Comprehensive Overview Medical injection molding is critical when it comes to creating medical plastic parts. Especially, when these parts need to be thin-walled and free from defects because of their applications in areas like syringes and implants. The medical injection molding process provides a cost-effective, productive, and repetitive manufacturing solution. But […]
What is Micro Injection Molding Micro Injection molding ( micro-molding) is small & high-precision thermoplastic injection molding parts and components with tight tolerances ( 0.001mm to 0.005mm). this type of micro injection molding parts is used in the medical industry, automotive, aerospace, and electronic industry, the microinjection mold is as same as standard injection mold […]
Polyethylene is PE for short, which has the properties of softness, non-toxic, cheap, and easy to process. It is a kind of typical crystallographic polymer. PE-LD has the lightest density in its own kind and is easy to ventilate and soak. It has good dielectric properties and chemical resistance properties, softness, elongation, impact force resistance. […]
What is POM injection molding? POM injection molding or acetal injection molding, is a process for creating parts by injecting molten POM (Polyoxymethylene) material into a mold, where it cools and solidifies. POM is a thermoplastic polymer that is commonly used in precision parts such as gears, bearings, and electrical components due to its high […]
Polystyrene (PS, GPS) is commonly known as ordinary styrene hard plastic which is transparent and belongs to translucent plastic (with greater density than water, fragility). The properties of PS include good optical performance 88%-92%, excellent electrical performance, easily molding and processing and good colorability. Its disadvantages include fragility, low temperature of heat-resisting, high requirements for […]
Injektionsteknikkerne for polyterephthalsyrealkoholester (PET) Det kemiske navn på PET er polyterephthalsyrealkoholester, også kaldet polyester. På nuværende tidspunkt bruges GF-PET af de fleste kunder. PET-sprøjtestøbningsdele bruges mest i flaskepræformsprodukterne PET har en god reologisk egenskab i smeltet tilstand og tryk [...].
Når en ny sprøjtestøbning er helt færdig, er det næste trin formforsøg (test), for at prøve formen skal vi kontrollere nogle vigtige oplysninger for at undgå fejl, vi er nødt til at kontrollere plastmaterialet, prøvernes farve, mængdeprøver, som vi skal sende til kunden, enhver særlig tolerance, hvis det skal være [...].
As a professional plastic mold company, during mold manufacturing, we normally have some requirement for mold modification, this is a very common issue when we manufacture molds for our customer, below is a step that how to handle this modification in our mod company When we receive a request for modification from our customer. After […]
Danish 
English 
Italian 
French 
Spanish (Spain) 
German 
Russian 
Dutch 
Polish 
Turkish 
Arabic 
Portuguese 
Hungarian 
Czech 
Greek 
Finnish 
Japanese 
Korean 
Swedish 
Norwegian 
Romanian 
Spanish (Mexico)